Video In Terminal Connection - Panasonic TH-55AF1U Operating Instrctions

●
The computer shown in the illustration is for example
purposes only.
●
Additional computer, cables and conversion adapter
shown are not supplied with this set.
●
Do not set the horizontal and vertical scanning
frequencies for PC signals which are above or below
the specified frequency range.
●
Component Input is possible with the pin 1, 2, 3 of the
Mini D-sub 15P Connector.
●
Change the [Component/RGB-in select] setting in
the [Signal] menu to [Component] (when Component
signal connection) or [RGB] (when RGB signal
connection). (see page 78)
● For audio, it is also possible to use AUDIO2 IN
terminal input. (For [Audio input select] function, see
page 92.)
Pin assignments and signal names for PC Input
Terminal (Mini D-sub 15P)
Pin No.
R (P
G (Y)
B (P
NC (not connected)
GND (Ground)
GND (Ground)
GND (Ground)
GND (Ground)
+5 V DC
GND (Ground)
NC (not connected)
SDA
HD/SYNC
VD
SCL
24
English
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Signal Name
/C )
R R
/C )
B B

VIDEO IN terminal connection

Note
●
Video equipment, connection cables and conversion
plugs are not supplied with this unit.
●
For audio, it is also possible to use AUDIO1 IN
terminal input. (For [Audio input select] function, see
page 92.)
Shared with COMPONENT/RGB IN.
R/P /C B/P /C
R R B B
COMPONENT/RGB/VIDEO IN
Video pin cable (commercially available)
Pin-BNC conversion plug (commercially available)
Stereo audio cable (commercially available)
Video Cassette Recorder
DVD Player
G/Y/VIDEO
AUDIO2 IN
Stereo mini plug
(M3)