+ button
Adds the access point.
If the access point you wish to connect cannot be found on the list, set the following with manual input.
Selecting + button will display the setting menu of the network to add.
[Network SSID]:
[Security]:
[Show advanced options]: Displays [Proxy] and [IP settings] when a check mark is added to the check box.
Menu button
Select the menu button to display the following items.
[Scan]:
[WPS Pin Entry]:
[Wi-Fi Direct]:
[Advanced]:
Note
●
When [IP settings] is set to [DHCP], the IP address, etc. are not displayed. Confirm the current IP address, etc. in
[STATUS]. Also, the DNS set on this screen will be invalid.
●
When using a DHCP server, confirm that the DHCP server has started up.
●
For setting details, consult the network administrator.
●
The wired LAN and wireless LAN cannot be used in the same segment.
56
Enter the SSID.
Select the encryption method from the following.
[None], [WEP], [WPA/WPA2 PSK], [802.1x EAP]
Searches for access points in your area again, and displays them on the list.
Use this when connecting to the access point device compatible with WPS.
A PIN code is displayed in the message displayed when this is selected. Input the PIN
code into the access point device within 2 minutes.
For operation of the access point device, read the operating instructions supplied with
the device.
Directly communicates between Wi-Fi devices without the access point device.
Selecting this will display usable devices on the list. Select the device to connect.
Displays the option settings related to Wi-Fi communication.