Micro-USB terminal connection
By connecting the unit to the PC using the Micro-USB
cable, data in the storage of the OpenPort PLATFORM
system can be read or written from the PC.
Micro-USB cable (commercially available)
PC
Pin assignments and signal names for Micro-USB
Terminal
5
4
Pin No.
+5 V DC
DATA
DATA
ID
GND (Ground)
The Micro-USB terminal is capable of supplying power
of up to 5V/500mA to an external device when the
picture is displayed or it is in standby condition (Power
Indicator: Orange) (see page 32).
●
If the electric current exceeding the power supplying
capability is applied, the output is blocked, and the
following message is displayed on the screen.
(In standby condition, the message is displayed when
the picture is displayed next time.)
[USB DC5V OUT overload (OpenPort PLATFORM).
Please remove cable or equipment, then turn the
display off/on.]
In this case, remove the connected equipment, and
then turn the power off/on with the <Main Power On /
Off button>.
Note
●
Additional computer and cables shown are not
supplied with this set.
●
Insert or remove the Micro-USB cable slow and
straight, avoiding excessive force.
Micro-USB
3
2
1
Signal Name
31
English