Pc In Terminal Connection - Panasonic TH-55AF1U Operating Instrctions

Hide thumbs Also See for TH-55AF1U:
Table of Contents

Advertisement

When inputting HDCP signal, it is possible to daisy
chain up to 8 displays.
The DVI-D output function is enabled when the
picture is displayed via DVI-D IN. When using the
daisy-chain connection method, all the displays
should be in the state where the picture is displayed
via DVI-D IN.
Pin assignments and signal names for DVI-D
Input/Output
Pin No.
T.M.D.S. data 2-
T.M.D.S. data 2+
T.M.D.S. data 2 shield
DDC clock
DDC data
T.M.D.S. data 1-
T.M.D.S. data 1+
T.M.D.S. data 1 shield
+5 V DC
GND (Ground)
Hot plug detect
T.M.D.S. data 0-
T.M.D.S. data 0+
T.M.D.S. data 0 shield
T.M.D.S. clock shield
T.M.D.S. clock+
T.M.D.S. clock-
Signal Name

PC IN terminal connection

PC IN
(Female)
(Male)
Mini D-sub 15p cable (commercially available)
Conversion adapter (if necessary) (commercially
available)
Stereo mini plug (M3) cable (commercially available)
PC
The type of computer signal that can be connected
With regard to the typical PC input signals that
are described in "Preset Signals" (see page 110),
adjustment values such as for the standard picture
positions and sizes have already been stored in this
unit.
(Computer signals which can be input are those with
a horizontal scanning frequency of 30 to 110 kHz and
vertical scanning frequency of 48 to 120 Hz.)
The display resolution is a maximum of 1 440 × 1 080
dots when the aspect mode is set to [4:3], and 1 920
× 1 080 dots when the aspect mode is set to [16:9].
If the display resolution exceeds these maximums, it
may not be possible to show fine detail with sufficient
clarity.
In [ENGLISH(US)] OSD language, [16:9] is displayed
as [FULL].
Note
The PC IN terminal is DDC2B-compatible. If the
computer being connected is not DDC2B-compatible,
you will need to make setting changes to the
computer at the time of connection.
There is no need to use an adapter for computers
with DOS/V compatible Mini D-sub 15P terminal.
Shared with DVI-D IN.
AUDIO1 IN
Stereo mini plug
(M3)
Connect a cable
which matches
the audio output
terminal on the
computer.
(commercially
available)
English
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-49af1uTh-49af1wTh-42af1wTh-42af1uTh-55af1w

Table of Contents