Panasonic TH-55AF1U Operating Instrctions page 91

■
[Input change mode]: [Normal]
Switches to the backup input if an interruption of
video occurs.
Note
●
When an analogue (PC, COMPONENT or VIDEO)
input is being used for viewing, you cannot set an
analogue (PC, COMPONENT or VIDEO) input as a
backup input.
●
Any analogue (PC, COMPONENT or VIDEO)
input cannot be set as [Primary backup input] or
[Secondary backup input].
● This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
[Primary backup input]
Sets the first priority backup input.
(None) / [OpenPort PLATFORM] / [HDMI1] /
[HDMI2] / [DVI-D] / [PC] / [COMPONENT]* /
[VIDEO] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
When an analogue (PC, COMPONENT or VIDEO)
input is being used for viewing, you cannot set an
analogue (PC, COMPONENT or VIDEO) input as a
backup input.
Any analogue (PC, COMPONENT or VIDEO)
input cannot be set as [Primary backup input] or
[Secondary backup input].
[Secondary backup input]
Sets the second priority backup input.
(None) / [OpenPort PLATFORM] / [HDMI1] /
[HDMI2] / [DVI-D] / [PC] / [COMPONENT]* /
[VIDEO] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
When an analogue (PC, COMPONENT or VIDEO)
input is being used for viewing, you cannot set an
analogue (PC, COMPONENT or VIDEO) input as a
backup input.
Any analogue (PC, COMPONENT or VIDEO)
input cannot be set as [Primary backup input] or
[Secondary backup input].
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
[Main input]
Displays the (main) input initially used for viewing.
[Current input]
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
OpenPort
PLATFORM
HDMI1
HDMI2
DVI-D
Main
PC
COMPONENT*
VIDEO
USB
○: S electable for both Primary and Secondary.
: Selectable for either Primary or Secondary.
×: Not selectable for neither Primary nor Secondary.
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
16:9
Backup mode OK
Backup
OpenPort
PLATFORM
PC
HDMI1
COMPONENT*
HDMI2
VIDEO
DVI-D
× ×
○
○ ×
○
English
USB
×
○
○
×
91