Selecting The Input Signal - Panasonic TH-55AF1U Operating Instrctions

■
Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
'No activity power off' is enabled.
When [No activity power off] in the [Setup] menu is set to
[Enable], a warning message is displayed every time the
power is turned ON. (see page 83)
Note
●
[No activity power off] is not activated with OpenPort
PLATFORM input. The message [ 'No activity power
off' is enabled.] is not displayed, either.
●
The message [Last turn off due to 'No activity power
off'.] is also displayed when OpenPort PLATFORM
input is used at the time the display is turned on.
"Power management" Information
Last turn off due to 'Power management'.
When "Power management" is functioned, an
information message is displayed every time the power
is turned ON. (see page 81)
These message displays can be set with the following
menu:
●
[Options] menu
Power on message(No activity power off)
(see page 96)
Power on message(Power management)
(see page 96)

Selecting the input signal

Select the signals input to the unit.
Press <INPUT> or <INPUT (Unit)>.
Switches input every time the buttons are pressed.
[OpenPort PLATFORM] → [HDMI1] → [HDMI2] →
[DVI-D] → [PC] → [COMPONENT]* → [VIDEO] →
[USB]
[OpenPort PLATFORM]:
OpenPort PLATFORM system built into this unit.
[HDMI1]:
HDMI 1 terminal, HDMI input
[HDMI2]:
HDMI 2 terminal, HDMI input
[DVI-D]:
DVI-D IN terminal, DVI-D input
[PC]:
PC IN terminal, PC input
[COMPONENT]*:
COMPONENT/RGB IN terminal, Component input
[VIDEO]:
VIDEO terminal, composite video input
[USB]:
USB terminal, USB input
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
Unit
INPUT
MENU
ENTER
PC
16:9
37
English