Ir In/Ir Out Terminal Connection; Audio Out Terminal Connection; Usb Terminal Connection - Panasonic TH-55AF1U Operating Instrctions

IR IN/IR OUT terminal connection

Connect the mini plug (M3) cable from the IR OUT
terminal of the first display to the IR IN terminal of the
second display.
The infrared signal of the first display is sent to the
second display.
In this case, the IR (infrared ray reception on the remote
control sensor) on the second display does not operate.
Repeating the above connections enables the daisy
chain connection.
Note
●
Connection cables are not supplied with this unit.
●
Daisy chain connection is possible only between the
displays of the same series.
IR IN
IR OUT
SERIAL
IN
SERIAL
OUT
Stereo mini plug (M3) cable (commercially available)
First display
Second display
Third display
28
English
IR IN
IR OUT
IR IN
SERIAL
IN
IR OUT

AUDIO OUT terminal connection

AUDIO2 IN AUDIO OUT
Stereo audio cable (commercially available)
Audio equipment
Note
● Audio equipment and the cable shown are not
supplied with this set.
● To output sound from AUDIO OUT terminal of the
unit, be sure to set [Output select] in the [Sound]
menu to [AUDIO OUT]. (see page 70)

USB terminal connection

Connect the USB memory (commercially available) to
use [USB media player]. (see page 103)
Also, power is supplied when a separately sold stick PC,
etc. are connected.
Note
●
A stick PC and connection cables are not supplied
with this unit.
AV IN
Stereo mini plug
(M3)
line-in
USB