Using Microsd Card; Usb (Openport Platform) Terminal Connection - Panasonic TH-49AF1U Operating Instructions Manual

Using microSD card

By attaching a microSD card (commercially available)
to the microSD card slot, use it as external storage for
OpenPort PLATFORM system.
(see page 47)
■
microSD card usable on this unit
The following microSD card compliant with SD standard
can be used on this unit.
(Such cards are referred to as microSD card in this
manual.)
microSD memory card (64 MB to 2 GB)
•
microSDHC memory card (4 GB to 32 GB)
•
Only the Fat16-formatted microSD card and FAT32-
formatted microSD card can be used on this unit.
■
To insert or remove the microSD card
microSD card
cover
Screw
1 Using a driver, loosen the screw of the microSD
card cover (anti-theft cover), and remove the
cover.
2 Make the surface of the microSD card face back
side of the unit, and insert it securely until a
clicking sound is heard.
●
For removal, push in the card until it clicks, and pull
it out straight.
3 Attach the cover to the original position.
Note
● Do not touch the connection terminal of the
microSD card.
●
Before attaching or removing the microSD card
cover, turn the unit off with <Main Power On / Off
button>.
●
Be careful not to lose the removed cover. Be sure
to attach it to the original position.
●
While the microSD card is operating, do not turn
this unit off, pull out the microSD card, or subject
this unit to vibration, shock or static electricity.
Saved data, etc. may be lost, or malfunction may
occur.
● When removing a microSD card, unmount the SD
card. (see page 58)
● Do not insert non-standard microSD cards, or
cards other than the microSD card.
Malfunction may occur.
30
English
USB (OpenPort PLATFORM) terminal
connection
By attaching a USB memory (commercially available)
to the USB (OpenPort PLATFORM) terminal, use it as
external storage for OpenPort PLATFORM system. (see
page 47)
With OpenPort PLATFORM input, it is possible to
connect and use USB devices such as a USB mouse, a
USB keyboard, etc. (see page 43, 44)
Note
●
USB memory, USB device and cable shown are not
supplied with this unit.
microSD card
USB memory
USB mouse (commercially available)
Pin assignments and signal names for USB
Surface
(OpenPort PLATFORM) Terminal
Pin No.
Each USB (OpenPort PLATFORM) terminal is capable
of supplying power of up to 5V/500mA to an external
device when the picture is displayed or it is in standby
condition (Power Indicator: Orange) (see page 32).
●
If the electric current exceeding the power supplying
capability is applied, the output is blocked, and the
following message is displayed on the screen.
(In standby condition, the message is displayed when
the picture is displayed next time.)
[USB DC5V OUT overload (OpenPort PLATFORM).
Please remove cable or equipment, then turn the
display off/on.]
In this case, remove the connected equipment, and
then turn the power off/on with the <Main Power On /
Off button>.
1 2 3 4
Signal Name
+5 V DC
DATA
DATA
GND (Ground)
USB
OpenPort
PLATFORM