Description Of The Controls; Instructions For Use - Hyundai VK 232 Instruction Manual

Description of the controls

P1 ON/Off switch
P2 Water level scale
P3 Lid
P4 Button for open hinged lid
P5 Multi-directional base

Instructions for Use

Before you start:
Before first time use, boil and empty water in the kettle several times. Check bellow mentioned
recommandations for Kettle use:
1) Unwind sufficient cord from the storage area to reach the power outlet. Then place the
power base on a dry, flat surface.
2) Open the lid and fill the kettle with cold water.
3) Make sure that the water level is between the minimum and maximum marks on the water
level scale. Do not switch on the kettle when empty.
4) Check and correct the filter's position before boiling the water. The automatic shutt off switch
may not work properly without the filter.
5) Close the lid and place the kettle back on the base.
6) Plug to AC outlet with the voltage corresponded to the information on the product label.
7) Switch the kettle on by the main switch. The indicator light will go on showing that the water
is being boiled.
8) When the water has boiled, the kettle will switch off automatically.
9) Do not remove the kettle from the power base without first switching off.
10) Remember if you wish to re-boil, put the main switch of the kettle to the "ON" position.
ENG - 19
ENG