Description Of The Controls - Hyundai VKC 751 Instruction Manual

Description of the controls

P1. ON/Off switch
P2. ON/OFF indicator light
P3. Lid
P4. Multi-directional base
Instructions for Use
Before you start:
Before you use your new kettle for the first time, please, boil water and pour it away.
1) Unwind sufficient cord from the storage area to reach the power outlet. Then place the power
base on a dry, flat surface.
2) Open the lid and fill the kettle with cold water.
3) Make sure that the water level is between the minimum and maximum marks on the water
level scale. Do not switch on the kettle when empty.
4) Close the lid and place the kettle back on the base.
5) Plug to AC outlet with the voltage corresponded to the information on the product label.
6) Switch the kettle on by the main switch. The indicator light will go on showing that the water is
being boiled.
7) When the water has boiled, the kettle will switch off automatically.
8) Do not remove the kettle from the power base without first switching off.
9) Remember if you wish to re-boil, put the main switch of the kettle to the "ON" position.
10) The kettle may be switch off at any time by either pushing the main switch of the kettle to the
"OFF" position.
11) When water boils, the steam passes through the steam channel and then switches off the
kettle. To pour water, lift the kettle from the power base and pour.
12) When pouring out the water incline the kettle slightly and gradually. Do not forget that hot
water is inside.
ENG - 19
ENG