Description Of The Controls - Hyundai VK 830B Instruction Manual

Description of the controls

P1. ON/Off switch
P2. ON/OFF indicator light
P3. Water level scale
P4. Lid
P5. Multi-directional base
Instructions for Use
Before you start:
Before you use your new kettle for the first time, please, boil water and pour it away. The same
should be repeated more times to get rid of the unpleasant plastic taste, which is usual for plastic
products. If the boiled water tastes still like a plastic, please, repeat the same process until the
unpleasant taste is not present any more.
If the result of boiling process is still negative, please, contact the service point.
1) Unwind sufficient cord from the storage area to reach the power outlet. Then place the power
base on a dry, flat surface.
2) Open the lid and fill the kettle with cold water.
3) Make sure that the water level is between the minimum and maximum marks on the water
level scale. Do not switch on the kettle when empty.
4) Check and correct the filter's position before boiling the water. The automatic shutt off switch
may not work properly without the filter.
5) Close the lid and place the kettle back on the base.
6) Plug to AC outlet with the voltage corresponded to the information on the product label.
7) Switch the kettle on by the main switch. The indicator light will go on showing that the water is
being boiled.
8) When the water has boiled, the kettle will switch off automatically.
9) Do not remove the kettle from the power base without first switching off.
10) Remember if you wish to re-boil, put the main switch of the kettle to the "ON" position.
ENG - 19
ENG