Description Of The Controls - Hyundai VK 319 Instruction Manual

Description of the controls

P1. ON/Off switch
P2. ON/OFF indicator light
P3. Water level scale
P4. Lid
P5. 2 cups
Instructions for Use
Before you start using your new kettle:
Before you use your new kettle for the first time, please, boil water and pour it away. The same
should be repeated more times to get rid of the unpleasant plastic taste, which is usual for plas-
tic products. If the boiled water tastes still like a plastic, please, repeat the same process until
the unpleasant taste is not present any more.
If the result of boiling process is still negative, please, contact the service point.
1) Open the lid and fill the kettle with cold water.
2) Make sure that the water level is between the 100 ml and maximum marks on the water
level scale. Do not switch on the kettle when empty.
3) Close the lid.
4) Plug to AC outlet with the voltage corresponded to the information on the product label.
5) Switch the kettle on by the main switch. The indicator light will go on showing that the water
is being boiled.
6) When the water has boiled, the kettle will switch off automatically.
7) Remember if you wish to re-boil, put the main switch of the kettle to the "ON" position.
8) The kettle CAN NOT switch off at any time by either pushing the main switch of the kettle.
9) When water boils, the steam passes through the steam channel and then switches off the
kettle.
10) When pouring out the water incline the kettle slightly and gradually. Do not forget that hot
water is inside.
ENG - 19
ENG