Description Of The Controls; Instructions For Use - Hyundai VK 319 Instruction Manual

Description of the controls

P1. ON/Off switch
P2. ON/OFF indicator light
P3. Water level scale
P4. Lid
P5. 2 cups

Instructions for Use

Before you start using your new kettle:
Fill the kettle with clean cold water up to max., turn it on and let the water boil before first use.
Then Pour the water out and repeat the process several times (at least five times). You will boil
the kettle out properly this way and get rid of potential taste of plastic. If you feel like you have
aftertaste of plastic from boiled water, we recommend to repeat the procedure according to the
instructions in the paragraph CLEANING AND MAINTENANCE. Another recommendation is to
leave the empty kettle open for 24 hours. The material of the kettle coming in touch with water is
approved of sound health properties. Potential slight "smell" or „aftertaste of plastic" during first
use after unpacking the kettle is a common case and should not be a reason for returning the
appliance.
If the result of boiling process is still negative, please, contact the service point.
1) Open the lid and fill the kettle with cold water.
2) Make sure that the water level is between the 100 ml and maximum marks on the water
level scale. Do not switch on the kettle when empty.
3) Close the lid.
4) Plug to AC outlet with the voltage corresponded to the information on the product label.
5) Switch the kettle on by the main switch. The indicator light will go on showing that the water
is being boiled.
6) When the water has boiled, the kettle will switch off automatically.
7) Remember if you wish to re-boil, put the main switch of the kettle to the "ON" position.
8) The kettle CAN NOT switch off at any time by either pushing the main switch of the kettle.
ENG - 19
ENG