5. Once you are convinced that the expansion valve is properly calibrated, readjust the
rotary pump pressure by unscrewing "B" to reach your preferred pressure - normally in the
range of 8.2 to 9.0 bar. Then tighten lock nut "A".
Notes:
1) Make small adjustments, then turn the pump on and check. Don't attempt any of
these adjustments while the pump is on.
2) The term expansion valve is somewhat of a misnomer as this device is really the
overpressure valve for the group boiler. The steam boiler has its own dedicated valve.
9 Optional Accessories
Drain Kit
Programmable Timer
Use this link to download the installation and programming guide for this device:
http://s1cafe.com/s1v2/images/Vivaldi%20Timer%20Instructions.pdf
S1 Vivaldi II Owner's Manual
Page 27