Steam Pressure Adjustment - La Spaziale S1 Vivaldi II Owner's Manual

-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 ˚C Offset
----------------------------------------------------------"
#---------------------------------------------------------
Note that neither the
reach the limit of their range. Once you get to +8˚C additional presses of the
button do nothing. Same with the
See table below:
Offset 91ºC
Lamp
0ºC Off
±1ºC On
±2ºC On
±3ºC On
±4ºC On
±5ºC On
±6ºC On
±7ºC On
±8ºC On

4.11.3 Steam Pressure Adjustment

Steam pressure can be adjusted up or down in 1, 2, or 3 increments of slightly less than 0.1
bar each. The overall pressure range is from approximately 0.9 bar to about 1.4 bar. In
reality this adjustment is changing the steam boiler temperature in increments of 1ºC and you
get the resulting pressure change.
This adjustment starts with the S2V2 in Standby mode (ON/STBY light flashing).
• Press and hold the
• At this point the 94 ºC and 95 ºC yellow lamps will be on solid. If no other lights come
on, your pressure is at the default settings and has not previously been raised or
lowered from that setting.
• If additional lights are blinking here is the meaning:
S1 Vivaldi II Owner's Manual
Single Cup nor the
Double Cup
92ºC 93ºC
Lamp Lamp
Off Off
Off Off
On Off
On On
On On
On On
On On
On On
On On
One Cup button for 3 seconds.
Single Cup Button
Double Cup Button
Double Cup button presses wrap around when they
button once -8˚C is reached.
94ºC 95ºC
Lamp Lamp
Off Off
Off Off
Off Off
Off Off
On Off
On On
On On
On On
On On
Page 15
Single Cup
96ºC 97ºC ECON
Lamp Lamp Lamp
Off Off
Off Off
Off Off
Off Off
Off Off
Off Off
On Off
On On
On On
Off
Off
Off
Off
Off
Off
Off
Off
On