Set Number Of Rings; Message Alert Tone - VTech VC7151 User Manual

Set number of rings

You can set the answering system to answer an incoming call
after 2, 3, 4, 5 or
6 rings; or toll saver. If you choose toll saver, the answering
system answers after 2 rings when you have new messages,
or after 4 rings when you have no new messages.
1. Press MENU on the handset or telephone base when idle.
2. Press or on the handset, or CALLER ID / or
PHONEBOOK / on the telephone base to scroll to
Answering sys, and then press SELECT.
on the handset, or CALLER ID / or
3. Press or
PHONEBOOK / on the telephone base to scroll to Ans sys setup, then press
SELECT.
4. Press or on the handset, or CALLER ID / or PHONEBOOK / on the
telephone base to scroll to # of rings, then press SELECT.
on the handset, or CALLER ID / or PHONEBOOK / on the
5. Press or
telephone base to scroll to choose 6, 5, 4, 3, 2 or Toll saver, and then press
SELECT.

Message alert tone

When the message alert tone is set to on, and there is at least one new message,
the telephone base beeps every 10 seconds. The message alert tone is preset to
off.
Press MENU when the phone is not in use.
1.
on the handset, or CALLER ID / or PHONEBOOK /
2. Press or
telephone base to scroll to Answering sys, and then press SELECT.
on the handset, or CALLER ID / or PHONEBOOK /
3. Press or
on the telephone base to scroll to Ans sys setup, then press SELECT.
4. Press or on the handset, or CALLER ID / or PHONEBOOK /
on the telephone base to scroll to Msg alert tone, then press SELECT.
on the handset, or CALLER ID / or PHONEBOOK /
5. Press or
telephone base to scroll to choose On or Off.
SELECT
6. Press to save and you hear a confirmation tone.
64
on the
on the