Mount the garage door sensor
You can choose to use mounting tape or screws to mount the sensor.
NOTES
•
Make sure the mounting surface is fully cleaned. A textured surface or any imperfections
to a smooth surface can keep the mounting tape from making a strong bond.
Mount with tapes:
1. Attach the mounting tape onto the rectangular area of the back cover, and then
stick the garage door sensor onto the garage door.
2. Firmly press the sensor for 30 seconds to ensure full contact on the surface area.
Mount with screws:
1. Press the latch button on the sensor to open the battery compartment case.
2. Use the two holes on the back cover to mark the desired location of the garage
door.
22