Open/Closed Sensor Installation - VTech VC7151 User Manual

Open/closed sensor installation

Power on the open/closed sensor
The batteries are pre-installed in your open/closed sensor.
To activate the batteries:
Pull the battery tab off from the sensor to activate the batteries.
The garage door sensor powers on.
NOTES
• The open/closed sensor is already pre-registered to the telephone base.
Check the open/closed sensor before use
1. Separate the sensor unit from the magnet unit.
You will hear an announcement alert - "Open/Closed X* is open", from the
•
handset and the telephone base.
The handset and the telephone base will display "Open/Closed X is open",
•
and then .
The SENSOR light on the telephone base will turn red.
•
2. Combine the sensor unit with the magnet unit.
will disappear from the handset and the telephone base.
•
The SENSOR light on the telephone base will turn off.
•
24