VTech VC7151 User Manual page 33

Missed alert icon and
open icon
will be displayed.
Test the open/closed sensor's signal strength
You can mount the Open/Closed Sensor on a door, window, medicine cabinet, or
any object that opens or closes.
1. Take the sensor unit and magnet unit to the desired mounting location, and use
adhesive tape to hold them temporarily in place at the object and the frame.
2. Use your handset to enter the Sensor setup menu, and then the Sensor setup
menu. Follow the steps to test the sensor's signal strength. When the screen
displays Good signal. Good location for sensor.. Press OK. The testing is
complete.
NOTES
• If you do not receive an alert when you open the door, window, or medicine cabinet,
move your telephone base closer to the mounting location or move the sensor closer to
the telephone base.
• Depending on surroundings and obstructing factors, like walls or cabinets, the sensor
may not transmit to the base properly.
*
Open/Closed X refers to the sensor's name. X refers to the system-assigned number of the
sensor.
"Open/Closed X*
is open. "
25
Missed alert icon and open icon
will be displayed.