Set Alert Schedule As Always On - VTech VC7151 User Manual

Set alert schedule as always on

The default setting of sensors' alert schedule is Always on.
You will receive an announcement alert - "Sensor X * is open"
or "Motion X * sensor detected motion", every time a monitored
garage door,
in-house door, window, or medicine cabinet is opened, or
there is motion in the monitored area.
You can also set a reminder in case you forget to close the
monitored object. You can choose to receive an alert once
again if it remains open after 15, 30, or 60 minutes.
SENSORS
1. Press
on the handset, or CALLER ID / or PHONEBOOK/
or
base to scroll to the desired sensor.
-OR-
i. Press MENU when the phone is not in use.
ii. Press or
telephone base to scroll to Sensors, and then press SELECT.
iii. Press or
telephone base to scroll to the desired sensor, and then press SELECT.
2. Press OPTIONS
3. Scroll to choose Alert schedule
4. Press SELECT
5. Scroll to choose Off, 15 minutes, 30 minutes, or 60 minutes, and then press
SELECT
to save.
NOTES
• When you received the alert tone and announcement, the handset will display Sensor X
is open or Motion X detected motion, whilst the telephone base will display Sensor X is
open or Motion X sensor detected motion.
• For garage door sensor and open/closed sensor, both the handset and telephone base
will also display , and the SENSOR light on the telephone base will turn red.
*
Sensor X or Motion X refer to the sensor's name.
X refers to the system-assigned number of the sensor. You can edit the sensor's name to your
preferred name. See Rename the sensor on page 43.
on the handset or telephone base when idle, and then press
on the handset, or CALLER ID / or PHONEBOOK/
on the handset, or CALLER ID / or PHONEBOOK/
to enter the individual sensor menu.
schedule, and then press SELECT.
to select Always on. The reminder menu appears.
38
Open/closed 1
Set schedule
on the telephone
on the
on the