NOTES
•
At the last 10 seconds of exit delay time, there will be a beep every second.
•
When a delay time has been set, there will not be any local or remote call alerts
when a monitored garage door, in-house door, window, or medicine cabinet is
open, or when there is motion in the monitored area, during the delay time.
•
If you are not able to exit home before the delay time ends, you can restart the
delay time again when you are ready to leave:
- switch the sensor mode to Local, and then switch it back to Remote; or
- press DISARM to switch the sensor alert system to Disarmed, and then press
ARM to switch it back to Armed.
•
The delay time set will be activated when:
- the sensor mode is switched to Remote from the Armed-Local mode; or
- the sensor alert system is switched to Armed from the Disarmed-Remote
mode.
MODE
1.
Press
on the handset or telephone base when idle.
on the handset, or CALLER ID / or PHONEBOOK/
2.
Press
or
on the telephone base to scroll to choose Remote, and then press OPTIONS.
3.
Press
or
on the handset, or CALLER ID / or PHONEBOOK/
on the telephone base to scroll to choose Set delay and then press SELECT.
on the handset, or CALLER ID / or PHONEBOOK/
4.
Press
or
on the telephone base to scroll to choose On, and then press
proceed to choose the exit delay time.
•
To skip time delay setting, scroll to choose Off, and then press SELECT.
on the handset, or CALLER ID / or PHONEBOOK/
5. Press
or
on the telephone base to scroll to choose 3 minutes, 5 minutes or 8 minutes,
and then press
6. Press
or
on the handset, or CALLER ID / or PHONEBOOK/
on the telephone base to scroll to choose 0 minutes, 1 minute or 3 minutes,
and then press
SELECT
to proceed to choose the entrance delay time.
SELECT
to save the delay time.
36
SELECT
to