Mute; Call Waiting; Find Handset - VTech VC7151 User Manual

Mute

The mute function allows you to hear the other party but the other party cannot
hear you.
1. During a call, press MUTE on the handset or telephone base. The screen
displays Muted until the mute function is turned off.
2. Press MUTE again to resume the conversation. The screen briefly displays
Microphone ON.

Call waiting

When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
Press FLASH to put the current call on hold and take the new call.
•
Press FLASH to switch back and forth between calls.
•

Find handset

Use this feature to find all system handsets.
To start paging:
Press /FIND HANDSET on the base. All idle handsets
•
ring and display ** Paging **.
To mute paging:
• Press MUTE, MUTE, CANCEL, or
To end paging:
Press /FIND HANDSET or
•
-OR-
• Press , , or any dialing key on the handset.
NOTE
Do not press and hold /FIND HANDSET for more than four seconds. It may lead to
•
handset deregistration.
on the handset.
STOP
on the base.
50