Set Languages; Set Lcd Language; Sound Settings; Set Number Of Rings - VTech VS112-2 User Manual

keys.
4. Enter the day using the dialing keys.
5. Enter the year using the dialing keys,
then press MENU/SELECT to move
on to set the time.
6. Enter the hour using the dialing keys.
7. Enter the minute using the dialing
keys.
8. Press p/q to highlight AM or PM,
then press MENU/SELECT to confirm.

Set languages

Set LCD language

You can select English, French, or Spanish
to be used for all screen displays.
To select the LCD language
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Settings, and
then press MENU/SELECT.
3. Press MENU/SELECT to select LCD
language.
4. Press p/q to highlight English,
Français or Español, and then press
MENU/SELECT to confirm.
NOTE
• If you accidentally change the LCD
language to French or Spanish, you
can reset it back to English without
going through the French or Spanish
menus. Press MENU/SELECT in idle
mode, then enter *364#. There is a
confirmation tone.

Sound settings

Set number of rings

You can set the answering system to
answer an incoming call after two, three,
four, five, or six rings. You can also select
toll saver, which is explained below. By
default, the answering system answers
an incoming call after four rings.
To set the number of rings
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Answering
sys, then press MENU/SELECT.
3. Press p/q to highlight Ans sys
setup, then press MENU/SELECT.
4. Press p/q to highlight # of rings,
then press MENU/SELECT.
5. Press p/q to choose from 6, 5, 4, 3,
2 or Toll saver.
• Toll saver - the answering system
answers a call after two rings
when you have new messages, or
after four rings when there is no
new message. This feature allows
you to check for new messages
and avoid paying long distance
charges when calling from out of
your local area.
6. Press MENU/SELECT to save.
NOTE
• If Smart call blocker is on, the first
ring of all calls will be muted.
75