Garage door sensor installation
Power on the garage door sensor
The batteries are pre-installed in your garage door sensor.
To activate the batteries:
Pull the battery tab off from the sensor to activate the batteries.
The garage door sensor powers on.
NOTES
•
The garage door sensor is already pre-registered to the telephone base.
Check the garage door sensor before use
1.
Hold the sensor and tilt it to 90 degrees, with the
You will hear an announcement alert - "GARAGE X* is open" from the handset
•
and the telephone base.
The handset and the telephone base will display "GARAGE X is open", and
•
then .
The SENSOR light on the telephone base will turn red.
•
2. Tilt the sensor to 90 degrees to the original upright position.
will disappear from the handset and the telephone base.
•
The SENSOR light on the telephone base will turn off.
•
20
logo facing downward.