4> 0-T100 (Main Circuit Block)
Three BTs (6 x 15)
✁
U8 (BT 3.8 x 10)
✂
Twenty-one lead wires
✄
Remove the PCB from the connector (2ea, flip type).
☎
Remove the PCB from the connector (4ea, plug type)
✆
Caution
Don't apply excessive pressure on the PCB of the CCD block as this may affect its performance.
Ensure that the PCB is not bent.
- This Document can not be used without Samsung's authorization -
. SERVICE INFORMATION
157