Samsung GX-20 Service Manual page 100

Hide thumbs Also See for GX-20:

Table of Contents

. ADJUSTMENT

C lick on the "CI" button on the top menu of the main screen.

Check that the USB IO has been changed to "Unconnect" from "Connect".

C lick on the "end" button and end the program.

D isconnect the USB cable from the camera and check the side light.

1. Attach a bundle lens to the camera and set the camera as follows.

AV mode, aperture stop F8, ISO 200, spot side light, focus MF mode, set the lens distance to 35M,

set the distance ring to infinitive.

2. Put the camera near the EV tester.

3. Check the Tv display by changing the brightness (LV) and half-pressing the release button as

shown in the following table.

If the shutter speed values change identically to the table above according to the changes of the LV

values with the aperture stop of F8, the adjustment has been completed. Otherwise perform the

adjustment again.

- This Document can not be used without Samsung's authorization -

Chapters

Table of Contents