Samsung GX-20 Service Manual page 349

1. Spot metering frame
2. AF Frame
3. Flash status
Appears when fl ash is available and blinks when fl ash is recommended but not set.
4. Shutter speed
Displays the shutter speed when capturing or adjusting (Shutter speed can beadjusted using this front dial (
and rear dial ( ).)
5. Aperture
Displays the aperture value when capturing or adjusting (Aperture value can be adjusted using this front dial (
and rear dial ( ).)
6. Focus indicator
Appears when image is focused.
7. Manual Focus
Appears when the Manual Focus is selected.
8. Exposure Bar
Displays the Exposure Compensation Value. The differences between Current Exposure Value and Proper Exposure
Value in the M mode.
9. Indicate the RAW fi le format is selected.
It appears when the fi le format is selected to RAW (RAW+).
10. EV compensation
Appears when EV compensation is available or in use.
11. Flash Exposure Compensation
12. AE Lock indicator
Appears when AE is locked.
13. ISO Indicator
14. Number of recordable images / EV compensation
Shows the number of recordable images (including the number of recordable images using the Drive mode.) with
current quality and recorded pixel setting. The differences between the compensated exposure and proper
exposure will be displayed. In the M mode, the exposure value can be different. In the Sensitivity priority mode /
Shutter & Aperture Priority mode, ISO sensitivity will display.
15. OIS (Optical Image Stabilization) indicator
16. AF Frame
17. Focus point
- This Document can not be used without Samsung's authorization -
. SPECIFICATION
)
)
25