Basic Operation - Sharp AY-AP9LW Operation Manual

BASIC OPERATION

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to the
room temperature when the unit is turned on.
Modes and Temperature Settings
Room temp.
at operation
Mode
start-up
Below 21˚C HEAT
21˚C-24˚C DRY
24˚C-26˚C COOL
26˚C-28˚C COOL
Above 28˚C COOL
AY-AP9LW_VN.indb 5
2
5
3
1
4
Automatic Operation
Temperature Setting
23˚C
Room Temp. -2˚C
24˚C
25˚C
26˚C
GB-5
1
Press the MODE button to select the
operation mode.
AUTO HEAT
2
Press the ON/OFF button to start operation.
• The red OPERATION lamp (
will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed up to 2°C
above or below the temperature automatically
determined by the air conditioner.
COOL/HEAT MODE
• The temperature can be set within the
range of 18 to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO SOFT LOW
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp (
will turn off.
COOL DRY
) on the unit
HIGH
) on the unit
4/2/10 2:41:46 PM