Setting The Alarm Clock - Gigaset dx800a Instruction Manual

Setting the alarm clock

Setting the alarm clock
Prerequisite: The date and time have
already been set (page
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v
Í Organizer
¤
You can enter data in the following fields:
Activation:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Occurrence:
Select Daily or Monday-Friday.
Volume:
Set the volume for the alarm (1–5) or cre-
scendo ring (volume increases with each
‡
ring = ).
Signal:
Select the melody for the alarm.
§Save§
Press the display key.
In the idle display header, you see the ¼
icon and the wake-up time.
A wake-up call is signalled on the display
¢
( page 4) and with the selected ringer.
The wake-up call sounds for 60 seconds.
If no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only sig-
nalled by a short tone.
96
116).
¢
Alarm Clock
Deactivating the wake-up call/
repeating after a pause
(snooze mode)
Prerequisite: A wake-up call is sounding.
§OFF§
Press the display key. The wake-
up call is deactivated.
Or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after five
minutes. After the second repe-
tition the wake-up call is deacti-
vated completely.