Setting The Alarm Clock; Restoring The Handset Default Settings - Gigaset S450 User Manual

Gigaset S455 / USA EN / A31008-M1714-B101-1-19 / registr_sett.fm / 28.3.06
S450
Battery:
Select On, Off
warning tone is activated/deactivated
or only sounds during a call.
¤
Save changes (page 44).
You cannot deactivate the confirmation
tone for placing the handset in the base
station.

Setting the alarm clock

Requirement: The date and time have
already been set (page 10).
Activating/deactivating and setting the
alarm clock
¢
v ì
¤
Change multiple line input:
Activation:
Select or Off.
On
Time:
Enter the wake-up time in 4-digit
format.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes (page 44).
You will see the icon ¼.
A wake-up call with the selected ringer
melody is signaled on the handset. The
wake up call sounds for 60 seconds. The
display shows Alarm
pressed the wake-up call is repeated twice
at five minute intervals and then switched
off.
During a call, the wake-up call is signaled
by a short tone.
or In Call. The battery
Clock. If no key is
Deactivating the wake-up call/
repeating after a pause (sleep mode)
Requirement: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
Or:
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset
default settings
You can reset any individual settings and
changes you have made. This will not
affect entries in the directory, call-by-call
list, calls list or the handset's registration
to the base station.
¢ ¢ ¢
v Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
Cancel the restoring process by pressing
a or the display key
Handset settings
Reset Handset
.
§No§
29