Using Lists; Redial List - Gigaset dx800a Instruction Manual

Using lists

Using lists
The options are:
u

Redial list

u
Call lists
u
Missed alarms list
u
Answering machine list
Redial list
The redial list contains the 20 numbers last
dialled with the base (max. 32 digits). If one
of the numbers is in the directory, the corre-
sponding name will be displayed.
Manual redial
Q
Press the key to open the redial
list.
s
Select entry.
c
Pick up the receiver.
The number is dialled.
When a name is displayed, you can display
the corresponding phone number:
¤
Press the display key
of the control key.
¤
Press right or left on the control key as
required to view the next/previous
number.
¤
Press right or left on the control key to
view another number of the same direc-
tory entry, e.g. the office number.
Open the redial list. Once you have assigned
a line (e.g., to establish an external consulta-
tion call); you must then press the display
§Dial§
key to dial the selected number.
58
§View§
or the middle
Automatic redial
In idle status:
Q
Press the key.
s
Select entry.
§Options§
Open menu.
Automatic Redial
Select and press
(for VoIP calls only)The base switches to idle
status. The display shows Auto Redial
together with the phone number.
The number is automatically dialled at fixed
intervals (at least every 20 seconds). The
speaker key flashes, "open listening" is
switched on, the microphone is switched off.
u
The party answers: Pick up the receiver
c or press the handsfree key d.
"Automatic redial" ends. The base
switches to normal receiver/speaker
mode.
u
Party does not answer: The call is termi-
nated after approx. 30 seconds. After
ten unsuccessful attempts, "Automatic
redial" ends.
¤
To cancel automatic redial, press the dis-
§OFF§
play key or any key.
Please note
One automatic redial function can be
active per device (registered handsets
and base). Overall, one automatic redial
function can be active on the telephone
system for each available line.
If automatic redial is assigned to all lines,
you will hear the busy tone when you try
to activate another.
§OK§
.