Table of Contents
Advertisement
Connecting the base to a PABX
Changing a dialling pause (pause
after access code)
v
Open the main menu.
*#Q5#
Press keys in sequence.
~
Enter a digit for the length of
the pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 4 sec.) and
§OK§
press
Inserting a dialling pause:
¤
Assign the function Insert P
¢
(
page 109)
to one of the programma-
ble keys.
¤
When entering the phone number, at the
point at which a dialling pause is to be
inserted, press this function key.
A P appears in the display
Setting flash (fixed line)
By default, your phone is set for operation on
the main connection (flash 250 ms). For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
¢
Ï
¢
v
Telephony
s
Select flash and press
Ø
(
= set value). Possibilities
include: 80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms, 400 ms,
600 ms, 800 ms.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number via
your analog fixed line.
*
Press the star key.
126
.
¢
Flash Duration
§Select§
After the call ends, pulse dialling is automat-
ically reactivated.
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (Tone),
u
Pulse dialling (Pulse).
Regardless of the setting options above,
after dialling or during a call, the phone
automatically switches to tone dialling
(DTMF) e.g., for controlling an answering
machine remotely.
¢
¢
Ï
v
§
Telephony
q
Select dialling mode and press
Ø
§OK§
(
= set value).
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is used only for a few old
PABXs.
¢
Dialing Mode
Advertisement
Table of Contents
