Gigaset dx800a Instruction Manual page 138

Service (Customer Care)
Status Meaning
code
0x400 Wrong call
0x401 Not authorised
0x403 The requested service is not supported
by the VoIP provider.
0x404 Wrong phone number.
No connection on this number.
Example: While making a local call you
have not dialled the area code although
your VoIP provider does not support
local calls.
0x405 Method not permitted.
0x406 Not acceptable.
The requested service cannot be pro-
vided.
0x407 Proxy authentication required.
0x408 The party cannot be reached
(e.g., account has been deleted).
0x410 The requested service is not available
from the VoIP provider.
0x413 Message is too long.
0x414 URI is too long.
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not supported
by the VoIP provider.
0x480 The dialled number is temporarily una-
vailable.
0x481 The recipient is not available.
0x482 Double service query
0x483 Too many "jumps":
The query was rejected because the
service server (proxy) has decided that
this query has already passed through
too many service servers. The maximum
number is defined beforehand by the
original sender of the query.
0x484 Wrong number:
In most cases this response means that
you have simply omitted one or more
digits in the phone number.
136
Status Meaning
code
0x485 The URI dialled is not unique and cannot
be processed by the VoIP provider.
0x486 The called party is busy.
0x487 General faults:
The call was cancelled before a call was
established. The status code confirms
receipt of the interruption signal.
0x488 The server cannot process the query
because the data entered in the media
description is not compatible.
0x491 The server notifies that the query will be
processed as soon as a previous query
has been completed.
0x493 The server rejects the query because the
phone cannot decrypt the message.
The sender has used an encryption
method that either the server or the
receiver phone cannot decrypt.
0x500 The proxy or the receiving device has
discovered a fault while executing the
query. It is therefore impossible to exe-
cute the query. If this occurs, the caller or
the phone displays the fault and repeats
the query after a few seconds.
The number of seconds after which
the query can be repeated may be
transmitted to the caller or phone by the
receiving device.
0x501 The query cannot be processed by the
recipient because the recipient does not
have the functionality that the caller
requires. If the recipient understands the
query but does not process it because
the sender does not have the necessary
rights or the query is not permitted in
the current context, status code 405 is
transmitted instead of 501.
0x502 In this case, the receiving device that
transmits this error code is a proxy or a
gateway and has received an invalid
response from its gateway via which this
query is to be processed.
0x503 The query cannot be processed by the
receiving device or the proxy at present
because the server is either overloaded
or is being serviced. If it is possible for
the query to be repeated in the
foreseeable future, the server informs
the caller or the phone of this.