Connecting The Base Station To The Pabx; Recall (Fixed Line); Saving An Access Code (Outside Line Code) - Gigaset A510ip User Manual

Connecting the base station to the PABX

The following settings are only necessary if your PABX requires them; see the PABX
user manual.
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.

Recall (fixed line)

Setting recall
Your phone is preset for operation on the main connection. For operation on a
PABX, you may have to change this value. Please refer to the user guide for your
PABX.
¤
§Menu§
q

Saving an access code (outside line code)

You can save two access codes: one for dialling via the fixed line and one for dialling
via VoIP.
Prerequisite: You must enter an access code for external calls using your PABX, e.g.,
"0".
¤
§Menu§
¤
You can enter data in the following fields:
Access ext line with:
For dialling via the fixed line: enter or change the access code, max. 3 digits.
For:
Specify when the access code should be inserted for dialling via the fixed line:
Call Lists
The access code is put in front of numbers dialled from one of the following lists:
– The SMS list
– The accepted calls list
– The missed calls list
All Calls
The access code prefixes all numbers dialled.
Off
The access code for the fixed line is deactivated. It does not prefix any phone
number.
Access IP line with:
For dialling via VoIP connections: Enter or change access code, max. 3 digits.
¤
Ï Settings
Telephony
Select recall and press
100 ms, 120 ms, 180 ms, 250 ms, 300 ms, 400 ms, 600 ms, 800 ms.
¤
Ï Settings
Telephony
Connecting the base station to the PABX
¤
Recall
§OK§
(³ = set value). Possible values are: 80 ms,
¤
Access Code
115