Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 15

_ SECURE TO THE CABINETRY ON THE SIDES
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
leveling feet up to required
distance by hand.
To access the side brackets,
you might have to push aside
the insulation. After securing,
ensure the sound insulation is
repositioned correctly.
Hexagonal
socket
Secure using two pairs
of formed brackets
(use _" (16 mm)
screws). Repeat on
the other side of the
chassis.
Ensure product is level and
aligning with cabinetry.
_ REFIT THE DRAWER ONTO THE RUNNERS
Ensure the drawer
is now rotated
clockwise back.
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
Ensure the release tabs on
both sides are reset fully.
@
OPTIONALLY SECURE TO THE CABINETRY ABOVE 16
x2)
The top mounting
brackets will only bend
upwards a maximum of
3/8"(10mm).