Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 12

NOW CHOOSE WHICH INSTALLATION METHOD (a)
IS MORE SUITABLE FOR YOUR CABINETRY...
12
RECOMMENDED METHOD (a) ° SECURE WnTHOUT DRAWER REMOVAL
(FRAMELESS CABINETRY ONLY}
_ ATTACH SIDE MOUNTING BRACKETS
Clip all four side mounting brackets into
their slots using a flat-bladed screwdriver.
Ensure they're securely fitted before
sliding product into cavity.
(_ PULL THROUGH HOSES PUSH INTO THE CAWTY
&
optionally attach the
(x2) two top mounting brackets
Ensure the product is level
The mounting slots are in pairs, one on each side
diagonally across the product. A bracket must
match A slot and B bracket must match B slot.
You can raise or lower the product
by twisting the feet. Then take
care when pushing the product
into the cavity that you do not
bend the feet.
Asyou push product in, pull
through hoses and cord,
ensuring they don't get
kinked or twisted.