Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 19

@
@
THERE ARE THREE DIFFERENT DRAINAGE OPTIONS. CHOOSE WHICH iS MORE SUITABLE.
2O
Dishwasher and Standpipe 0 1½" (38 mm)
If space is limited
for fixing, push
hose through drain
hose support
to required height
Dishwasher using Air Break with Drain Hose Joiner
373_ "
(950mm) i
Max.
height
to top of
Air Break
CONNECT iNLET HOSE TO HOT WATER
Tighten coupling with wrench.
2_ SWITCH PRODUCT ON
Dishwasher using sink trap with drain hose joiner
Supplied drain hosejoiner
0 _" (19 ram) waste tee
If space is limited
for fixinq, push
hose through drain
hose support to
required height
HIGHLOOP
min. 6"
(150 mm)
Ensure drain hose is routed straight
to joiner. Remove excess drain hose
material if necessary.
Do not shorten the inlet hose.
Important!
Ensure that drain connection
will comply with Iocal piumbin9
regulations.