INTEGRATED MODELS ONLY ° INSTALLING THE FRONT PANELS
19
(_
ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS
+ or-
_6"
With the front panels fitted, insert an appropriately
sized Philips screwdriver into the hole above the door
pin and rotate the panels up or down to align the gaps
in your cabinetry.
Repeat on the other side if necessary.
Each panel has a maximum travel of_A6"(2 mm) up or
down.
Important!
Ensurethatyou maintain a minimum of _6" (8 mm)
ventilation gap between the upper and lower panels.
(_
FITTING A CUSTOM TOEKICK PANEL
,%" (16mm) x5
@
You can optionally glue your
custom toekick panel onto the
supplied panel