Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 9

TALL HEIGHT INTEGRATED MODELS ONLY- CUSTOM PANEL CALCULATIONS
The following calculations assume the top of the upper panel is
aligned with the top of the adjacen t cabinetry. The final
panel/cabinetry alignment is achieved by adjusting the feet:
WIDTH OF ALL PANELS
Measure A (the width between adjacent door/drawer fronts)
and write it in the first box below, then complete the equation.
FRONT PANEL SPECiFiCATiONS
%- 13A6" ( 16-20 ram) panel thickness
Adequately sealed to withstand moisture (122%/50°C @ 80% RH)
Maximum weight of each panel: 20 Ib (9 kg)
TOEKICK PANEL SPECiFiCATiONS
rain. 3/8" (9 ram) panel thickness if using supplied screws
Adequately sealed to withstand moisture (122°F/50°C @80% RH)
You may choose to affix your custom toekick panel either by
screwing it to the supplied mounting bracket or gluing it on the
supplied prefinished toekick panel.
A
min_ _,_J'(2mm)
HEIGHT OFTHE UPPER PANEL
Note: The 'upper panel extension' B allows for the top of the upper
panel to extend above the chassiswhere required.
HEmGHT OF THE LOWER PANEL
Measure (:: (door/drawer height (or equivalent)) and write it in the
first box below, then complete the equation.
\
l mino _46"(2mm)
mino5/i_"(Smm)
_ ventfladon g@
9
HEmGHT OF THE TOEKJCK PANEL
Measure D (height from the top of adjacent cabinet door fronts to the floor)
and write it in the first box below, then complete the equation.
If the toekick recess (dimension
J under 'Product dimensions') is
between 2" and 3 _" (50 and 84
mm) deep, the toekick panel will
need to be modified for fitting
around the underside of the
product.
See illustration for details on the
shape of the cutout required.
17" (432 ram)
R _/_"(1Z7 ram)