Fisher & Paykel DishDrawer DD24D 7 Installation Instructions Manual page 4

PARTS SUPPLIED ° ALL MODELS
4
Drain hose Drain hose Wire clip (2) Clamp (1) Side mounting Top Phillips Rubber
support (1) joiner (1) (for securing (for securing bracket kit mounting %" (16 mm) washer for
Drain hosejoiner) Drain hose joiner) (A and B) (2) brackets (2) screws (9) inlet hose (1)
OPTIONAL OPTIONAL (comes already
fitted)
Moisture protection Hexagonal
tape (1) . socket for feet
(to prevent mois[ure adjustment (2)
damage) (long & short)
Prefinished toekick (1)
ADDITIONAL PARTS SUPPLIED WITH INTEGRATED MODELS
Edge Protector (1)
(If the services hole is through
a metal partition the hole
must be protected with the
Edge protector supplied to
prevent damage to the power
cord or hosesJ
/f the Droin hosessupplied ore not long enough
to reoch your services,you must use o Droin Hose
f!_'tensionKit P/N 525Y98 which will extend the droin
hosesby 11' 70" (Zdm).
fhe kit is ovoi/ob/e from the neorest Fisher& PoyM/
Authorized _Service d2nter, or fb// free 1.888.93d./872
or www.fisherpoykel.com
Panel bracket (2)
(attached to product)
Panel mounting
screws (12)
Toekick mounting bracket (1)
(A custom toekickpanel of any
material with thickness
_"-_" (9 - 19 ram) can be screwed
to the plastic toekick mounting
bracket)
Toekick
mounting
screws (5)