Multitech 410 Configuration Manual page 43

Chapter 3 – Related MultiVOIP Setup Parameters
The kinds of parameters for which values must be chosen depend on the type of telephony supervisory
signaling or interface used (FXO, E&M, etc.). We present here the various parameters grouped and
organized by interface type.
Note that Interface parameters are applied on a channel-by-channel basis. However, once you have
established a set of Interface parameters for a particular channel, you can apply this entire set of Voice/FAX
parameters to another channel by using the Copy Channel button and its dialog box. To copy a set of
Interface parameters to all channels, select "Copy to All" and click Copy.
Multi-Tech Systems, Inc. Avaya Communication Manager Guide 43