Error Codes - Sartorius BL310 Instruction Manual

Error Codes

Error codes are shown on the main display for approx. 2 seconds, after which the program automati-
cally returns to the weighing mode.
Display
N o segments appear on
the display
h
l
e 01
e 02
e 09
e 10
e 11
e 22
e 30
Max. weighing capacity is less
than indicated under
Specifications
The weight readout
is obviously wrong
If any other errors occur, please contact your local Sartorius Service Center.
20
Cause
N o AC power is available
The AC adapter is not
plugged in
Battery is dead
The load exceeds the
balance/ scale capacity
The weighing pan is not in place P lace the weighing pan on the
Something is touching
the weighing pan
Display capacity exceeded:
Value to be output cannot be
shown on the display
Calibration parameter
requirement not met; e.g.:
balance/ scale not zeroed
balance/ scale is loaded
W hen gross value zero, no tare T are the balance/ scale
The t key is blocked when
there is data in the second tare
memory (net-total) only 1 tare
function can be used at a time
Value input is not allowed for
second tare memory
W eight is too light or there is
no sample on the balance/ scale or sample amount
Interface port for printer
output is blocked
The balance/ scale was
turned on without the weighing
pan in place
The balance/ scale has not
been calibrated/ adjusted
The balance/ scale was not
tared before weighing
Solution
Check the AC power supply
P lug in the AC adapter
R eplace the battery
R echarge the battery using
an external charger
Unload the balance/ scale
balance/ scale
Move the object that is
touching the weighing pan
Decrease the weight on
the balance/ scale
Calibrate only when zero
is displayed
P ress t to tare the
balance/ scale
Unload the balance/ scale
P ress c to clear the
tare memory and release the
tare key
P ress t
Increase the reference quantity
Contact your local Sartorius
Service Center
P lace the weighing pan on the
balance/ scale and press e
to turn the balance/ scale back on
Calibrate/ adjust the balance/
scale
T are before weighing