Sartorius BL310 Instruction Manual page 6

Setting up the Balance/ Scale
Balances/ Scales with an Analytical Draft Shield
Chamber:
Place the components listed below inside
the chamber in the order given:
Shield plate
Shield ring
Pan support
W eighing pan
Gem tray (only with model GC503)
Balances/ Scales with a Glass Draft Shield:
Place the components listed below inside
the chamber in the order given:
Draft shield base place it on the balance so that
the edge for fitting the glass draft shield faces
upwards and turn it until it is firmly in place
Pan support
W eighing pan
Glass draft shield
Draft shield cover place it on the balance so
that the edge faces downwards
Balances/ Scales with a R ound W eighing Pan
Place the components listed below inside
the chamber in the order given:
Pan support
W eighing pan
Balances/ Scales with a R ectangular W eighing Pan:
Place the weighing pan on the balance/ scale
5