NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE
DISPLAY FUNCTIONS
An NTI RACKMUX with a 17" monitor supports resolutions up to SXGA (1280 x 1024) with a refresh rate at between 55 and 76Hz.
When a 15" monitor is present, support for resolutions up to XGA (1024 x 768) apply with a refresh rate at between 55 and 76Hz.
The quality of the image on the LCD monitor is adjustable using an On Screen Display (OSD) menu using the control buttons on
the RACKMUX.
Standard Controls
The RACKMUX has 5 standard control buttons and a power LED. The 5 standard control buttons operate as follows:
•
The Power button turns the RACKMUX LCD and backlight ON and OFF as desired.
•
The Power LED located immediately below the Power button is a dual color
LED.
It will illuminate with a green color when the RACKMUX is powered
ON and working properly.
is powered ON but there is no input signal detected.
•
The Menu button is used to bring up the OSD menu where the various
settings of the LCD display can be adjusted. Once the OSD screen is
displayed, the Menu button is used to make selections within the menus.
See "OSD Control Menu" (below) for more on LCD display settings.
•
The Up and Down Arrow buttons are used to navigate through the menus.
Move the cursor up or down as desired to highlight an item for selection.
Once an item is highlighted, pressing the Menu button will select it.
•
The Select button is used to make selections within the OSD menus when the OSD menu is ON. When the OSD menu is
OFF, the Select button will act as an Auto Adjust button to keep the user from having to use the menus to adjust the quality
of the image on the monitor.
OSD Control Menu- VGA models
The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display. To activate the
OSD Menu, press the Menu button (above).
10-60 seconds and it will automatically be cleared from the screen.
OSD Main Menu
Selection
Purpose
Brightness/Contrast
Increase/decrease panel brightness/contrast level
Color
R,G,B color temperature control
Position
•
Video Image horizontal and vertical position control
•
Clock setting
•
Phase control
Setup
•
Control OSD Image position on screen
•
Set time OSD will stay on screen before auto shutoff
•
Select the language of the OSD menu
Exit
Exit from the OSD control menu
It will illuminate with a red color if the RACKMUX
To turn the Menu back OFF, either select "EXIT" from the main menu or just wait
Power
ON/OFF
Power LED
Up Arrow
Down Arrow
Select/
Auto Adjust
Figure 9- OSD Controls
Range
1-100
1-100
1-100
--
10 to 60 seconds
Several languages (see page 8)
7
Menu
Controls for the
OSD Menus
Need help?
Do you have a question about the RACKMUX-V15 and is the answer not in the manual?