Download  Print this page

Connecting The Machine To The Power Supply; Controlling Sewing Speed - ELNA 664 Instruction Manual

Hide thumbs

Advertisement

1
Operating Instructions:
The symbol "O" on a switch indicates the "off"
position of the switch.
This machine is equipped with a polarized plug
(one blade wider than the other):
To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not modify the plug in
any way (U.S.A. only).
Foot control model YC-482J-EC is used with this
machine (U.S.A only).
5
4
3
2
1
6
1

Connecting the Machine to the Power Supply

Turn off the power switch, and connect the machine
plug to the machine socket.
Connect the power supply plug to your power
supply.
Turn on the power switch.
1
Power switch
2
Machine plug
3
Machine socket
4
Power supply plug
5
Power supply
6
Speed controller

Controlling Sewing Speed

Sewing speed can be varied by the speed controller.
The harder you press on the controller, the faster the
machine runs.
Step on the speed controller with the presser foot
lifter up, and practice controlling the speed.
1
Speed controller
For your safety:
* While in operation, always keep your eye on the
sewing area, and do not touch any moving parts
such as the thread take-up lever, loopers,
handwheel, needle or knives.
* Always disconnect the machine from the power
supply:
— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.
* Do not place anything on the speed controller,
except when the machine is in use.
12

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: