Threading The Lower Looper - ELNA 664 Instruction Manual

10
9
8
7
(A)
1
2
3
1
2
3
4
5
6
1
(B)
2
3

Threading the Lower Looper

Open the looper cover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the right side thread
guide from back to front: A
* If the thread is coming out from the thread guide,
pass the thread through the thread guide
hole again as shown: B
1 Thread guide
2. After threading the thread guide bar, slip the
thread into the first guide on the machine as
shown.
Thread guide
2
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. ( If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
3
Lower looper thread tension dial
38