golmar MEL4503/NFC User Manual

golmar MEL4503/NFC User Manual

Audio and video door entry system with nfc access control combined with nexa button panels
Table of Contents

Advertisement

Audio and video
door entry system
with NFC access control
combined with Nexa
button panels
Code 50122088
T4503/NFC EN REV.
021
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MEL4503/NFC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for golmar MEL4503/NFC

  • Page 1: Nfc Access Control With Call Buttons

    Audio and video door entry system with NFC access control combined with Nexa button panels Code 50122088 T4503/NFC EN REV.
  • Page 2: Table Of Contents

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL INTRODUCTION First of all, we thank and congratulate you for purchasing this product. Our commitment to achieving the satisfaction of customers like you is manifested through our ISO-9001 certification and the manufacture of products like the one you have just purchased. Its advanced technology and strict quality control will ensure that customers and users enjoy the numerous features that this device offers.
  • Page 3: Set-Up Warnings

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL SET-UP WARNINGS Do not overtighten the screws on the power supply connector. Always disconnect the power supply before installing or making modifications to the devices. The fitting and handling of these devices must be carried out by authorised personnel. The wiring must run at least 40cm away from any other wiring Before connecting the device, check the connections between the door panel, power supply, distributors, monitors and telephones.
  • Page 4: System Characteristics

    Residents'/Visiting access card/key tag over the proximity reader. EL4503NFC access control module: NFC standalone access control module (Golmar proximity cards). Capacity of up to 2,000 Residents' cards/key tags and 30 Master cards/key tags. Basic configuration using configuration DIP switches.
  • Page 5: Description Of The Nexa Modular Door Panel

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE DOOR PANEL Description of the Nexa modular door panel: Exploded view of the parts of the panel. Electronic Embedding boxes Frame modules Aluminium panel modules Description of the door panel. Fixing screws for clip-on covers (x4) Fixing screws for embedding box (x2) Clip-on covers: 60xx...
  • Page 6 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE DOOR PANEL Description of the Nexa modular door panel: Short connection cable supplied with the EL610A module (length 8cm). For connections between the EL655 sound module and the EL610A button module and between the EL610A button modules of the same embedding box.
  • Page 7: Description Of The Sound Modules

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the EL655 sound module: Front. Speaker. Door panel speaker volume control potentiometer. Telephone speaker volume control potentiometer. Microphone. Sound module buttons (x2). Back. Label.
  • Page 8 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Descripción módulo de sonido EL6 Front. Speaker. Door panel speaker volume control potentiometer. Telephone speaker volume control potentiometer. Microphone. Sound module buttons (x2). Back. Door panel speaker volume control potentiometer. Telephone speaker volume control potentiometer.
  • Page 9: Description Of The El620/2Plus Sound Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the EL620/2PLUS sound module: Front. Speaker. Door panel speaker volume control potentiometer. Telephone speaker volume control potentiometer. Microphone. Sound module buttons (x2). Back. Configuration DIP switches.
  • Page 10: Description Of The Sw1 Programming Dip Switch

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the SW1 programming DIP switch: The SW1 configuration DIP switch is located on the top right-hand side of the back of the module. Set to OFF if it is a master door panel.
  • Page 11: Description Of The El632 Plus P/T / El642/Plus Sound Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the EL632 PLUS P/T / EL642/PLUS sound module: Front. Television camera. (Only the EL632 PLUS P/T module). LEDs (visual signals for people with impaired hearing). LEDs (Only functions with the EL632 Plus P/T sound module) Speaker.
  • Page 12: D Escription Of The Sw1 And Sw2 Programming Dip Switches

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the SW1 programming DIP switch: The SW1 configuration DIP switch is located on the left-hand side of the back of the module. DIP switches 9 and 10 have no function. Leave in the OFF position if the sound module is configured as operating mode EL500.
  • Page 13: Binary Coding Of The Sw2 Programming Dip Switch

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the SW2 programming DIP switch: The SW2 configuration DIP switch is located on the left-hand side of the back of the module. This enables the auto switch-on (audio and/or video communication without having been called) of the door panel if it has this switch set to the ON position.
  • Page 14: D Escription Of The El632 R5 P/T / El642/R5 Sound Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the EL632 R5 P/T EL642/R5 sound module: Front. Television camera (only the EL632 R5 P/T module). LEDs (visual signals for people with impaired hearing). LEDs (Only functions with the EL632 R5 P/T sound module) Speaker.
  • Page 15: D Escription Of The Sw1 Programming Dip Switch

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE SOUND MODULES Description of the SW1 DIP switch: The SW1 configuration DIP switch is located on the top left-hand side of the back of the module. This enables the auto switch-on (audio and/or video communication without having been called) of the door panel if it has this switch set to the ON position.
  • Page 16: Description Of The Button Modules

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE BUTTON MODULES Description of the EL610A button module: Front. Module buttons (x10). Back. Button connector input. Label. Button monitor connector (independent of call). Button connector output. Button number. - I1 Ind.
  • Page 17: Description Of The El610D Button Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE BUTTON MODULES Description of the EL610D button module: Front. Module buttons (x10). Back. Button connector input/output (x3). DIP switch (button call code). Button number.
  • Page 18: Description Of The El606D Button Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE BUTTON MODULES Description of the EL606D button module: Front. Module buttons (x6). Back. Button connector input/output (x2). DIP switch (button call code).
  • Page 19: D Escription Of The El4503/Nfc Access Control Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE ACCESS CONTROL MODULE Description of the EL4503/NFC module: Front. Proximity card reader. Two-colour LED (red/green). Back. P1 button. Sw1 programming DIP switch. Monitor connector. Power input Normally open output relay 1. Common relay 1.
  • Page 20: D Escription Of The Self-Testing Leds And Tones

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE ACCESS CONTROL MODULE Description of the SW1 DIP switch: The SW1 configuration DIP switch is located on the top right-hand side of the back of the module. It enables cards to be added/removed.
  • Page 21: Installation Of The Door Panel

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL INSTALLATION OF THE DOOR PANEL Location of the embedding box: 1850 1650 1450 Make a hole in the wall to position the top of the door panel at a height of 1.65m. Hole dimensions depend on the type of door panel.
  • Page 22: P Reparing The Cable Entry And Fitting The Embedding Box

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL INSTALLATION OF THE DOOR PANEL Preparing the cable entry: Break the flange to allow cable entry through the bottom part of the embedding box. In the case of door panels with more than one embedding box, break through the side holes and join the embedding boxes using cable grommets.
  • Page 23: Fastening The Frame To The Embedding Box

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL INSTALLATION OF THE DOOR PANEL Fastening the frame to the embedding box: Insert the spring hinge which attaches to the product in the embedding box, as shown in the drawing. To fasten the frame to the embedding box, insert the spring hinge into the housings provided for this purpose in the frame, as shown in the drawing.
  • Page 24 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL INSTALLATION OF THE POWER SUPPLY UNIT FA-PLUS and FA-PLUS/C power supply installation drawing: Install the power supply unit in a dry protected location free from the risk of dripping or splashing water. To prevent electric shock, do not remove the protective cover of the primary or handle the wiring.
  • Page 25: Description Of The Nfc Cards And Key Tags

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL DESCRIPTION OF THE NFC CARDS AND KEY TAGS Types of NFC card and key tag: The NFC access control module allows the following types of card and key tag: Residents' cards/key tags: NFC/US cards/key tags, when added as 'Residents' Cards,' allow access (see p. 27). Up to 2,000 cards (Residents', visiting (one-access) and visiting (multi-access) can be added.
  • Page 26: Operation Of The El4503/Nfc Module

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL OPERATION OF THE EL4503/NFC MODULE Description of module operation Module in standby mode. In standby mode, the module can perform the following operations: Activation of the external button: This enables activation of the relay 1 output using the exterior PL1 button. The button can be configured by means of programming to activate the output by pressing the button and deactivate it after a period of between 3 and 99 seconds has elapsed.
  • Page 27: Programming The El4503/Nfc Module

    Add visiting cards (one-access): set DIP switch 3 to ON, the LED on the front will blink (red). Then wave the new NFC/1U cards (Golmar) that you wish to add over the proximity reader one by one, the module will emit 2 tones and the LED will light up (green) for one second every time a Visiting proximity card (one-access) is memorised or the LED will blink rapidly (red) if the card has already been memorised.
  • Page 28 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE EL4503/NFC MODULE Continued from previous page Remove all user cards/key tags (Master): set DIP switches 1 and 2 to ON, the LED on the front will blink (red). Press the P1 button for 5 seconds (the red LED will blink rapidly), then the module will emit 2 tones and the LED will light up (green) for 1 second confirming that all Master cards/key tags have been deleted.
  • Page 29: Management Of Cards And Key Tags With The Master Card/Key Tag

    -Step 1: Wave a Master card/key tag over the proximity reader, the LED on the front will light up (red). -Step 2: Wave the new Residents' NFC/US cards / TAGNFC/US key tags (Golmar) that you wish to add over the...
  • Page 30 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE EL4503/NFC MODULE Continued from previous page Remove a Master card/key tag: -Step 1: Wave the Master card/key tag that you wish to remove over the proximity reader, the LED on the front will light up (red).
  • Page 31: Programming Tekna Plus Se Monitors

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE MONITORS Programming TEKNA PLUS SE monitors: Locate the SW2 configuration DIP switch situated on the top left-hand side of the back of the EL632 PLUS P/T module and set number 2 to ON. The door panel will reproduce a sound to advise that the system has entered into programming mode.
  • Page 32 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE MONITORS - GENERAL ENTRANCE DOOR PANEL ONLY Programming TEKNA PLUS SE monitors from a general entrance door panel (SW1-1 ON): Locate the SW2 configuration DIP switch on the general entrance door panel situated on the top left-hand side of the back of the EL632 PLUS P/T module.
  • Page 33: Programming Tekna R5 Col Su-R5 Monitors

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE MONITORS Programming TEKNA R5 COL SU-R5 monitors: Locate the DIP switch situated at the back of the EL632 R5 P/T sound module and set number 2 to ON, as described on p.
  • Page 34: Programming T-540 Plus Se Telephones

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE TELEPHONES Programming T-540 PLUS SE telephones: Locate the SW2 configuration DIP switch situated on the top left-hand side of the back of the EL632 PLUS P/T module and set number 2 to ON. The door panel will reproduce a sound to advise that the system has entered into programming mode.
  • Page 35 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE TELEPHONES - GENERAL ENTRANCE DOOR PANEL ONLY Programming T-540 PLUS SE telephones from a general entrance door panel (SW1-1 ON): Locate the SW2 configuration DIP switch on the general entrance door panel situated on the top left-hand side of the back of the sound module.
  • Page 36: Programming T-530 R5 Su-R5 Telephones

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL PROGRAMMING THE TELEPHONES Programming T-530 R5 SU-R5 telephones: Locate the DIP switch situated at the back of the sound module and set number 2 to ON, as described on p. 15. The door panel will reproduce a sound to advise that the system has entered into programming mode.
  • Page 37: Wiring Diagrams

    EL4503/NFC FA-Plus or FA-Plus/C EL632 PLUS P/T / EL642 PLUS access control module power supply unit sound module Mains Door panels with FA-Plus/C MEL4503/NFC access control module EL632 R5 P/T / EL642/R5 power supply unit sound module Mains Continued overleaf...
  • Page 38 AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL WIRING DIAGRAMS Continued from previous page EL4503/NFC Door panels with EL6 20/2 PLUS FA-Plus/C access control module sound module power supply unit Mains Combined with Nexa Modular / Nexa Stainless Steel panels: Audio door entry systems with one access door and 4+'n' installation.
  • Page 39: Cleaning The Door Panel

    AUDIO AND VIDEO DOOR ENTRY SYSTEM - NFC ACCESS CONTROL WIRING DIAGRAMS Continued from previous page Audio door entry systems with several access doors and 4+'n' installation. EL4503/NFC Door panels with EL651 TF-104 access control module sound module transformer I1 I2 Mains Lock release systems connected to audio door entry systems with 4+'n' installation operate at 12V AC: Fit the varistor supplied with the access control module directly to the terminals of the lock release.
  • Page 40: Compliance

    C/ Silici, 13 08940- Cornellá de Llobregat SPAIN Golmar se reserva el derecho a cualquier modificación sin previo aviso. Golmar se réserve le droit de toute modification sans préavis. Golmar reserves the right to make any modifications without prior notice.

Table of Contents