Table of Contents
Advertisement
CS-1708 / CS-1716 User Manual
F1 GOTO:
GOTO allows you to switch directly to a port either by keying in the port's Name,
or its Port ID.
w
To use the Name method, key in 1; key in the port's Name; then press
[Enter].
w
To use the Port ID method, key in 2; key in the Port ID; then press [Enter].
Note: You can key in a partial Name or Port ID. In that case, the screen will
show all the computers that the User has View rights to (see Set
Accessible Ports, p. 31), that match the Name or Port ID pattern,
regardless of the current List settings (see p. 26).
To return to the OSD Main Menu without making a choice, press [Esc].
F2 LIST:
The LIST function lets you broaden or narrow the scope of which ports the
OSD displays (lists) on the Main Screen.
Many of the OSD functions only operate on the computers that have been
selected for listing on the Main Screen with this function. The choices and
their meanings are given in the table below:
Choice
ALL
Lists all of the ports on the installation.
QUICK VIEW*
Lists only the ports that have been selected as Quick View
Ports (see p. 31).
POWERED ON
Lists only the ports that have their attached computers
Powered On.
QUICK VIEW +
Lists only the ports that have been selected as Quick View
POWERED ON*
Ports (see p. 31), and that have their attached computers
Powered On.
* These items only show up on the Administrator's screen, since only he
has Quick View setting rights (see p. 31, for details).
26.
Meaning
2004-04-27
Advertisement
Table of Contents
