F3 Set - ATEN Master View CS-1708 User Manual

Move the Highlight Bar to the choice you want, then press [Enter]. An icon appears
before the choice to indicate that it is the currently selected one.
After you make your choice and press [Enter], you return to the OSD Main Screen
with the newly formulated List displayed.

F3 SET:

This function allows the Administrator and each User to set up their own working
environment. A separate profile for each is stored by the OSD and is activated
according to the Username that was provided during Login. To change a setting:
1. Double Click it; or move the highlight bar to it, then press [Enter].
2. After you select an item, a submenu with further choices appears. To make
a selection, either Double Click it; or move the Highlight Bar to it, then
press [Enter]. An icon appears before the selected choice to indicate which
one it is. The settings are explained in the following table:
Setting
OSD HOTKEY Selects which Hotkey activates the OSD function: [Scroll Lock]
[Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may
conflict with programs running on the computers, the default is the
Scroll Lock combination.
PORT ID Allows you to position where the Port ID appears on the screen.
DISPLAY The default is the upper left corner, but you can choose to have it
POSITION appear anywhere on the screen.
You can use the mouse to position the Port ID Display, or you can
use the Arrow Keys plus Pg Up, Pg Dn, Home, End, and 5 (on the
numeric keypad with Num Lock off), to position the Port ID display,
then press [Enter] to lock the position and return to the Set
submenu.
PORT ID Determines how long a Port ID displays on the monitor after a port
DISPLAY change has taken place. The choices are: User Defined - which
DURATION lets you select the amount of time (from 1 - 255 sec.); and Always
On - which displays the Port ID at all times. If you select User
Defined, key in the number of seconds, then press [Enter]. The
default is 3 Seconds.
(Table continues on next page)
Function
2004-04-27
OSD Operation
27.