ATEN Master View CS-1708 User Manual page 34

CS-1708 / CS-1716 User Manual
(F3 SET: continued)
Setting
PORT ID Selects how the Port ID is displayed: the Port Number alone
DISPLAY (PORT NUMBER); the Port Name alone (PORT NAME); or the
MODE Port Number plus the Port Name (PORT NUMBER + PORT
NAME). The default is PORT NUMBER + PORT NAME.
SCAN Determines how long the focus dwells on each port as it cycles
DURATION through the selected ports in Auto Scan Mode (see p. 35). Key in a
value from 1 - 255 seconds, then press [Enter]. Default is 5
seconds; a setting of 0 disables the Scan function.
SCAN/SKIP Selects which computers will be accessed under Auto Scan Mode
MODE (see p. 35). Choices are: ALL - All the Ports which have been set
Accessible (see p. 31); POWERED ON - Only those Ports which
have been set Accessible and are Powered On; QUICK VIEW -
Only those Ports which have been set Accessible and have been
selected as Quick View Ports (see p. 31); QUICK VIEW +
POWERED ON - Only those Ports which have been set Accessible
and have been selected as Quick View Ports and are Powered On.
The default is ALL.
Note: The Quick View choices only show up on the Administrator's
screen, since only he has Quick View setting rights (see p. 31, for
details).
SCREEN If there is no input from the console for the amount of time set with
BLANKER this function, the screen is blanked. Key in a value from 1 - 30
minutes, then press [Enter]. A setting of 0 disables this function.
The default is 0.
HOTKEY Enables / Disables the Hotkey function (see p. 15) in case there is
COMMAND a conflict with programs running on the computers. On enables the
MODE function, Off disables it. The default is On.
HOTKEY Selects which keys invoke Hotkey Mode (see p. 15):
[Num Lock] [-] or [Ctrl] [F12]. The default is [Num Lock] [-].
28.
Function
2004-04-27